Dalen 1720 Rear blade is the last shot on the tribe of popular Rear blade From Dalen . The new cutting has the same well-known quality, but is narrower and lighter than the other tractor Dalen . With a width of 244 cm and height of the blade of 61 cm, it is especially suitable for smaller tractors.

The cutting is available in several models, where you can choose mechanical or hydraulic control of boom and shear blade.

Smooth wear steel with 305mm hole distance is standard. There is also the possibility of toothed and perforated wear steel.

Shock load valve can be installed to reduce the risk of damage to the equipment. In the event of a clash with the dome lids, curbs and the like, the oil is pushed via the shock load valve to the other side of the plunger. The pressure in the cylinder is reduced, the shear blade gives in, and the equipment gets better protection against damage.

The storage of the shear blade has an integrated tool for tightening and thus prevents slack. The bolt also has an integrated grease nipple. The sliding surface is also equipped with grease strips for less wear and easier turning.

Integrated connection

The cutting comes with integrated connectors for three-point, Triangle or HMV. Integrated coupling provides less slack, is more powerful and brings the centre of gravity closer to the tractor. The connections have lubrication, ensuring greater reliability and longer service life.

Support wheels

Single height control wheels in nine different positions provide precise control over the scraping.

Warning light

By equipping the shears with LED lights, safety and visibility along the road are increased.

Scraping edges

The tractor cut comes with smooth wear steel as standard. In addition, reversible, toothed or perforated wear steels are supplied – all with 305 mm hole distance, what we call "road standard".

Optional extras

Hydraulic steering of boom, shock valve (recommended), manual support wheels 5.00×8"