2014 Snow blower

This snowblower really comes into it's own in the most difficult of conditions - we call it "The Great Mountain King"!

  • Rugged and large snowblower, built for the largest tractors
  • Oversized impeller provides excellent snow-throwing
  • 1000rpm for less wear on the shafts
  • Rear mounted, with the possibility of being trailed, front mounting is also possible.
  • Quick-change configuration, between towing, reversing or front mounting.
  • Central gearbox - less power loss and increased reliability
  • Generously dimensioned auger, ensures that the impeller is constantly full.
  • Automatic couplings - no breaking screws to replace
  • Telescopic load-out capability (NEW)

Why choose a Dalen snowblower?

The Dalen snowblowers are well reputed for several reasons. They handle varying snow-conditions well, with snow melting and freezing again beeing a familiar challenge in Norway. Dalen-products are designed and manufactured in Norway, using top-modern production technologies, resulting in high quality products. Less down-time and high resale-value makes a Dalen snowblower a good investment!

Contact your nearest Eiksenter - the chances are high that they have a reference customer for the milling cutter you are interested in. The good user experiences are many and we are happy to share them with you!

Full control

Sometimes size does matter! For big jobs, you need a powerhouse on your team! For this we suggest the 2014 Snowblower. Clearing snowy areas is no chore at all!

This snowblower really comes into it's own when working in the most difficult conditions! Such as snow-clogged roads and big snow drifts. The side walls of the 2014 can be easily removed, with just a few bolts, transforming this versatile snowblower - into "The Great Mountain King!" When the side walls have been removed, you have additional control over the blower and the tractor - in either the rear or front-mount configuration. In difficult conditions, reliability is even more important. Not only because the last thing you want is problems, but also because when clients are waiting - you have no time to waste!

Cutout-clutches - no more shear bolts

The snowblowers are mounted with cutout-clutches instead of shear bolts on the augers. These automatically disengage when needed, and re-engage when the rpm is lowered. No need to change shear bolts! The clutches are well tested the last seasons, and the feedback has been very positive. This will be a time saver and make the snow removal job more comfortable!

Centrally located gearshift

A specially developed gearbox, located centrally located in the blower housing, transmits the power directly to the auger and impeller. In this way you avoid the power loss encountered on many two-stage snowblowers. You get the most power from your tractor, safely and reliable. This design also features fewer moving parts = increased reliability and longer life. The drive and bearing are enclosed in a cast housing, and are not exposed to dirt and grime.

DALEN's large and open auger

2014 is equipped with DALEN's big and open auger. This design provides an exceptionaly effective flow of snow for the full height of the impellor. The auger diameter is less than 95cm, minimizing obstructions in the flow of snow. The open construction pulls the blower into the snow - no box sides to offer resistance. Having a box structure can offer serious challanges in wet/heavy snow, and on slippery surfaces. The auger is constructed from replaceable sections, which can be replaced easily and affordably in the event of damage.

Side panels and upper wing cutting edges

The open side walls makes the 2014 easy to control in all conditions, even when mounted on the front and when reversing. The snowblower can be delivered with side panels. These pannels cover the open sides, and add a total of 18cm to the working width. In addition the 2014 can be delivered with upper wing cutting edges. They are mounted on top of the blower housing. These extensions not only cut the edge on the snow banks, but also enable the blower to clear more snow.

Rounded chute

All Dalen snow blowers are supplied with a rounded chute that compresses the stream of snow leaving the blower. This provides for increased throwing distance. Precise adjustments of the chute, give greater control of snow flow, and allow more pricise placement of snow discharge. The form of the chute ensures that a smotth flow of snow passes through the chute, without slowing down on the way through. The chute design makes it easy to throw the snow high and far distance. In urban areas you can precisely control the discharge to avoid houses, parked cars, and other obstacles. The collapsable chute provides easy access for impeller maintenance, or in event of the blockage, allows for access to clean-out the impeller. This is a highly prized feature, as it enebles maintenance to be done rapidly, allowing for a quick return to a warm tractor cab. The chute swivel does not feature a chain drive. It is gear driven, and is extremely reliable under varying temperatures. It has a swivel motor, and mechanically adjustable flap. A hydraulically adjustable flap is optional.

Hydraulic loading chute

The optional hydraulic loading chute comes into it's own on narrow city streets, roundabouts, intersections and alleys. It is ideal for loading trucks, and throwing snow over high snowbanks. Double hydraulic cylinders both for height adjustment and for the adjustable flaps ensures a solid and stable chute.

Compare Dalen snow blowers here

Optional extras

PTO shaft, hydraulically adjustable flap, hydraulic adjustable loading chute, gauge wheels, 6.00×9" (truck tires, front mount gearbox (incl. PTO shaft), chute swivel stop, right and left side panels, upper right and left wing cutting edges, perforated scraping edge.


2014-XTPA / SNOW BLOWER , 2STEP / 1600 KG

Working width: 270 cm / open side walls / transmission for towing 1000 rpm / 3-point linkage / hydr. swivel / adjustable flap (two parts) / skid shoes / cut out clutches / Note! without PTO-shaft

(Note! Reversing requires seperate PTO shaft)

Can be specially ordered with 540 rpm gearbox for towing.


Type Two-stage
Working width 270 cm
- w/ two side panels* 288 cm
- between upper wing cutting edges* 284 cm
Power requirement (kW/HP) 105/140
Impeller diameter 90 cm
Auger diameter 95 cm
Weight, approx from 1760 kg
Towing/Reversing/Front S/R/F*
Transmission towing, rpm 1000****
Replaceable scraping edge Yes**
Perforated scraping edge *
Hydraulic swivel chute Yes
Skids / wheels Yes / *
PTO stub 1 3/4"
PTO shaft Incl. ***
Connection frame TP
Cutout-clutches Yes

TP=3-point, TR=Triangle, HM= HMV

* Optional

** Reversible scraping steel made of hardened steel as standard.

*** 1000 rpm requires a separate PTO-shaft when used in reverse.

**** Can be delivered with 540 rpm



No video.

Related Products