2007 Snow blower

Large tractor but little time? The Dalen 2007 V-blower is designed for those in a hurry.

  • Tried and tested principles
  • Great capacity and throw - same impeller as top model 2014
  • Asymmetrical design
  • Hinged feeding fan blades dodges foreign elements
  • Hinged, tiltable chute for easy maintenance

Why choose a Dalen snowblower?

The Dalen snowblowers are well reputed for several reasons. They handle varying snow-conditions well, with snow melting and freezing again beeing a familiar challenge in Norway. Dalen-products are designed and manufactured in Norway, using top-modern production technologies, resulting in high quality products. Less down-time and high resale-value makes a Dalen snowblower a good investment!

Contact your nearest Eiksenter - the chances are high that they have a reference customer for the milling cutter you are interested in. The good user experiences are many and we are happy to share them with you!

Tried and tested principles

The principles behind the design is tried and tested through decades. This includes an assymetrical design which gives more effective feeding and less resistance, and hinged feeding fan-blades which dodges foreign elements coming into the blower. The V-blower has feeding fan blades on the impeller axle. The blades on the impeller axle help to feed the impeller with snow. To avoid damage to the blades, the feeding fan blades are hinged and will automaticly dodge if foreign objects should come into the blower.

The Dalen 2007 is a V-type pulled one-stage blower, designed for those with large tractors and less time. The V-blower enables higher driving speeds compared to a two-stage, and is optimal for quick road-clearing with smaller amounts of snow. Typically, V-blowers are preferred over two-stage snowblowers in the case of long clearing routes which are cleared repeatedly, while two-stage blowers are preferred when larger amounts of snow must be cleared at one time, especcially with wet and heavy snow. With long routes, 2007 can drive faster, meaning you can save a lot of time!

Dalen 2007 has great capacity and throw, stemming from the fact that the impeller is the same as in our top model Dalen 2014!

Asymmetrical design

As the blades rotate, some snow is thrown towards the left wall in the blower. To avoid snow from clogging up in this area, the left wall in the blower has a smaller angle relative to the driving direction compared to the right wall. This way the snow is guided into the impeller, giving better throughput. This is called the asymmetrical principle and was introduced by Dalen back in the 1980s.

Rounded chute

All Dalen snow blowers are supplied with a rounded chute, that compresses the stream of snow leaving the blower. This provides for increased throwing distance. Precise adjustments of the chute, give greater control of snow flow, and allow more precise placement of snow discharge. The form of the chute ensures that a smooth flow of snow passes through the chute, without slowing down on the way through.

The chute design makes it easy to throw the snow high and far distance. In urban areas you can precisely control the discharge to avoid houses, parked cars, and other obstacles. 

The collapsable chute provides easy access for impeller maintenance, or in event the of a blockage, allows for acces to clean-out the imperller. This is a highly prized feature, as it enables maintenance to be done rapidly, allowing for a quick return to a warm tractor cab.

The Dalen 2007 Snow blower has a large chute with sviwel motor and adjustable flap. The swivel is chainless and operates well in varying conditions. Hydraulic adjustable flap available as an option.

Compare Dalen snow blowers here

Optional extras

PTO-shaft, Top link bracket with float position, Triangle linkage with float position, Hydraulic adjustable flap, Loading sections, Wing cutting edge left and right, Support wheels with 6.00x9” heavy duty tires, Swivel stopper, Linkage extention (Adds 360mm between tractor and blower. Reduces angle on PTO-shaft. Also useful with large wheels.)

Models

2007 / SNOW BLOWER , V-TYPE / 800 KG

Working width: 260 cm / 3-point linkage / hydraulic sviwel / adjustable flap (two parts) / skids / without PTO-shaft

Specifications

Type V-type
Working width 260 cm
- w/ right wing cutting edge 275 cm
- w/ two wing cutting edges 285 cm
Power requirement (kW/HP) 70/95
Impeller diameter 90 cm
Weight, approx from 875 kg
Towing/Reversing/Front T
Replaceable scraping edge Yes
Toothed scraping edge *
Hydraulic swivel chute *
Skids / wheels Yes / *
PTO stub 1 3/4
PTO shaft Incl.
Connection frame 3-pt**

* Optional
** Triangle linkage with float position as optional equipment

What do customers say?

Pictures

Video

No video.

Related Products

Menu