A fully hydraulic machine for quality conscious customers with high demands for efficiency, functionality and usability. Together with the log deck and the turnable discharge conveyor, the DALEN 2054 comprises an effective system for firewood production.
2054 Firewood processor
- Fully hydraulic operation - all functions are controlled with one hand
- 7.7 and 11.3 tons splitting force
- Max cutting diameter: Ø 44 cm
- Automatic chain lubrication
- Clear-cut design - cuts bent, awkward wood with ease
- Easy access during maintenance
7.7/11.3 ton splitting power
Dalen 2054 has a fast and powerful splitter with two speed levels: 7.7 ton splitting power in fast mode at normal capacity, and 11.3 ton splitting power when the power mode is activated. Compared to earlier versions of the 2054 this represents an increase in splitting force of 37% and 28% respectively! The manually activated power mode is rarely used because of the powerful fast mode splitting capacity. The cylinder has a short stroke, making it very effective when producing firewood. The splitting cycle is 2.9 sec. The tractor’s PTO is operated at 400 rpm. Because of the low rotational speed, there is less noise and lower fuel-consumption.
Fully hydraulic steering makes the operation of the machine easy and effective
DALEN 2054 is powered hydraulically on all operation functions. The fully hydraulic control is more dependable, because it does not include V-belts,which causes wear and tear as well as the need for tightening.
- Hydraulic bar movement
- Hydraulic infeed conveyor
- Hydraulically adjustable knife
The hydraulic bar movement is operated with an easy-to-reach handle, which also steers the start of the splitter and hydraulic infeed conveyor. Direct hydraulic operation gives the operator full control of the bar movement. The machine automatically restrains the pressure on the log in order to produce the highest possible velocity. The machine has a clear-cut design which makes it possible for the operator to gain full control of the machine, and have a good overview of the cutting and splitting process.
DALEN 2054 is equipped with a chain saw for havesters. The 54 cm sword has a 0.404" hydraulically driven saw chain. The hydraulic chain saw stops when the operating handle for the saw is released. This is a big advantage when it comes to wear and tear, safety and reduced noise. A small adjustable oil pump is activated every time the saw bar is operated, and ensures that the chain is lubricated. This is very important during changing temperatures, and especially during cold weather. The chain is lubricated with oil from a separate tank containing chain saw oil, because hydraulic oil can damage your health.
Cuts bent, awkward wood with ease
The design of the protective covers gives you ample space during the input of large and bent logs. The hydraulic feeding conveyor makes the input of the logs much easier. The wide feeding-table makes it easier to support the logs even if they are outside the belt, and also makes it easier to support logs that are bent. In addition to the hydraulic feeding conveyor, the machine is equipped with a hydraulically adjustable knife. The machine is most effective when fed with logs that are 25-35 cm in diameter, but can cut logs up to 44 cm in diameter.
The hydraulic system is dimensioned for more effective splitting
The DALEN 2054’s hydraulic system is designed for effective use, faster splitting and higher capacity. The hydraulic tank contains 67 litres, and the other components are also dimensioned to handle the large oil flow. It is easy to measure the oil level on the tanks for chain oil and hydraulic oil. The Dalen 2054 is comes as standard with two oil pumps. Oil level and temperature are displayed on the oil tank.
Easy access during maintenance
During adjusting, filing or changing of components, the protective covers of the machine can easily be opened. During filing of the chain, the sword can be fastened in the lower position with a quick lock, giving the operator easy access from both sides. Consequently, there are shorter disruptions and the production is more effective. When the protective cover for the saw is open, the feeding/input table can be opened so that you will easily access the other components, and troubleshooting and maintenance can be carried out in an upright position.
Dalen Connection frame
DALEN 2054 can also be connected to the tractor with the DALEN Connection frame.
Dalen connection frame, sawdust extractor (electric or hydraulic operation), sawdust extractor hose (5m), 4-way splitting knife, 10-way splitting knife, service pack, log deck, conveyor belts (see information below)
2042 / CONVEYOR, 75 KG
Length 295 cm / swivel / winch
2045 / CONVEYOR / 95 KG
Length 340 cm / swivel / winch / foldable
2046 / CONVEYOR / 105 kg
Length 430 cm / swivel / winch / foldable
2054-THS / FIREWOODPROCESSOR / 655 KG
Tractor / two hydraulic pumps and tank (incl. 67 l oil) / 7.7 and 11.3 ton splitting / hydraulic steering, hydraulic bar, front and knife adjustment / PTO shaft included / without standard coupling frame
2054-EHS / FIREWOODPROCESSOR / 725 KG
Electric (230V) / two hydraulic pumps and tank (incl. 67 l oil) / 7.7 and 11.3 ton splitting / hydraulic steering, hydraulic bar, front and knife adjustment / without standard coupling frame
2054-EHSX / FIREWOODPROCESSOR / 725 KG
Electric (400V) / two hydraulic pumps and tank (incl. 67 l oil) / 7.7 and 11.3 ton splitting / hydraulic steering, hydraulic bar, front and knife adjustment / without standard coupling frame
2054-KHS / FIREWOODPROCESSOR / 740 KG
Combined tractor / electric (230V) / Two hydr.pumps and tank (incl. 67 l oil) / 7.7 and 11.3 ton splitting / hydraulic steering, bar, front and knife adjustment / PTO shaft included / without standard coupling frame
2054-KHSX / FIREWOODPROCESSOR / 740 KG
Combined tractor / electric (400V) / Two hydr.pumps and tank (incl. 67 l oil) / 7.7 and 11.3 ton splitting / hydraulic steering, bar, front and knife adjustment / PTO shaft included / without standard coupling frame
Machine drive: tractor (from 40 hp, depending on the tractor), electric or combined
Electrical motor (2054-EHS/EHSX/KHS/KHSX): 11 kW
Chain drive: hydraulic
Bar movement: hydraulic
Infeed conveyor, hydraulic
Blade Height: hydraulic
Bar / sprocket: harvester equipment
Bar length: 54 cm
Cutting diameter: max. 44 cm
Chain type: .404 ", 1.6 mm
Chain lubrication, adjustable oil pump
Chain lubrication, tank: 3.5 liters
Cutting length indicator, yielding: adjustable, 15-40 cm
Stroke, cylinder: 52 cm
Splitting force, fast mode: 7.7 tons / 200 bar
Splitting force, power mode: 11.3 tons / 200 bar
Activation of power mode: Manual
Knife, division, 4 -, 6 - or 10 - way splitting knife
Splitting cycle: approx. 2.9 sec. back / forth
Oil tank: approx. 67 litre, delivered with oil
Oil delivery, pump: approx 55 + 8 liters / min
Revolutions, PTO: 400 rpm
Connection to tractor: DALEN Connection frame
Height with collapsed 2045: approx. 235 cm
Weight: from 660 kg.
Recommended size of fuses, electric driven models:
2054-EHS, recommended: 50 amp.
2054-KHS, recommended: 50 amp.
2054-EHSX, recommended: 32 amp.
2054-KHSX, recommended: 32 amp.