2120/2121 Rear blade

The 2120 and 2121 are heavy duty rear blades for pro users.

  • Professionally constructed blade
  • Integrated wing with high snow discharge height.
  • High construction weight, provides for excellent scraping effect, upto 205kg extra weight.
  • Choice of mechanical or hydraulic boom
  • Different wheel solutions
  • Asymmetric mounting - extended reach to the right

Dalen 2120 and 2121 Rear blade are heirs of the best-selling shears Dalen 2019 and Dalen The new shears are 2.75 and 3 meters wide respectively.

The shears have been integrated to throwing wing, similar to the top model 2022, which makes it easier to move a greater amount of snow and more easily get the snow off the road, over auto protection or low ploughs.

Another feature inherited from 2022 is the hollow profile at the bottom of the reef with the possibility of weight gain by laying in steel or concrete. By utilizing this, you can increase the weight of the cut by up to 200 kg (depending on the shear model and filler material).

Choose hydraulic equipment as needed

The shears can be obtained with fully hydraulic steering, or with manual boom and hydraulic control of the cutting. In both cases, the blade can be easily flipped hydraulically from the driver's seat.

Shock load valve can be installed to reduce the risk of damage to the equipment. In the event of a clash with the dome lids, curbs and the like, the oil is pushed via the shock load valve to the other side of the plunger. The pressure in the cylinder is reduced, the shear blade gives in, and the equipment gets better protection against damage.

Asymmetrical design

2120 and 2121 Rear blade is asymmetrically stored. This means that the right side of the shear blade protrudes further than the left, and you do not have to drive all the way out into the edge of the snow when snow clearing.

In addition, it is always the short left side of the shear blade that goes under the boom when turning the cut. With a short boom, the centre of gravity is placed closer to the tractor and when ploughing heavy and heavy snow you have greater control over both tractor and shear. You will especially notice this on the slopes.

The storage of the shear blade has an integrated tool for tightening and thus prevents slack. The bolt also has an integrated grease nipple. The sliding surface is also equipped with grease strips for less wear and easier turning.

Integrated connection

The scrapers are supplied with integrated connectors for three-point, Triangle or HMV. Integrated couplings are better than intermediate frames as it provides less slack, is more powerful and brings the center of gravity closer to the tractor. The couplings also have lubrication for greater reliability and longer service life.

Manual or hydraulic wheels

Manual or hydraulic support wheels provide precise control over the scraping. Choose from different types, adapted to your needs. Manual or hydraulic wheels in 5.00×8" or 6.00×9" forklift tyres. The forklift tyres provide a steadier shear with less vibration. Rubber dampers prevent the wheel fork from hitting the blade.

Warning light

By equipping the shears with LED lights, safety and visibility along the road are increased. Available as an optional extra.

Scraping edges

The tractor scrapers come with smooth wear steel as standard. In addition, reversible, toothed or perforated wear steels are supplied – all with 305 mm hole distance, what we call "road standard".

Optional extras

Hydraulic steering of boom, shock valve (recommended), manual or hydraulic support wheels in 5.00×8" or 6.00×9" forklift tyres

Models 2120 (275 cm width)

2120-TPS/-TRS/-HSE / REAR BLADE

Hydraulic control of shear blade, mechanical steering of boom / 275 cm / asymmetric storage / -TP=3-point coupling / -TR=Triangle coupling / -HM=HMV coupling / without support wheel

2120-TPH/-TRH/-HMH / REAR BLADE

Hydraulic steering of shear blade and boom / 275 cm / asymmetric storage / -TP=3-point coupling / -TR=Triangle coupling / -HM=HMV coupling / without support wheel

Models 2121 (300 cm width)

2121-TPS/-TRS/-HSE / REAR BLADE

Hydraulic control of shear blade, mechanical steering of boom / 300 cm / asymmetric storage / -TP=3-point coupling / -TR=Triangle coupling / -HM=HMV coupling / without support wheel

2121-TPH/-TRH/-HMH / REAR BLADE

Hydraulic steering of shear blade and boom / 300 cm / asymmetric storage / -TP=3-point coupling / -TR=Triangle coupling / -HM=HMV coupling / without support wheel

Optional extras

Hydraulic steering of boom, shock valve (recommended), manual or hydraulic support wheels in 5.00×8" or 6.00×9" forklift tyres

Specs for all 2120 data

Working width 275 cm
Working height 65 cm
Work height, wing 85 cm
Steering – shear blade Hydraulic
Steering – boom mechanical/hydraulic
Weight, from 545 kg

 

Specs for all 2121 data

Working width 300 cm
Working height 65 cm
Work height, wing 98 cm
Steering – shear blade Hydraulic
Steering – boom mechanical/hydraulic
Weight, from 570 kg

What do customers say?

Pictures

Video

No video.

Related Products

Menu